The KTA5314/KTA5324 are quad 10- and 12-bit buffered voltage output DACs in MSOP10L packages that operate from a single 2.5V to 5.5V supply, consuming only 500uA at 3V. They have on-chip rail-to-rail output amplifiers with slew rate of 0.7V/us. A 3-wire serial interface compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards is used, which can operates at clock rates up to 30MHz.

The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneous. It incorporate a power-on reset circuit, and ensure that the DAC outputs power up to 0V and remains there until a valid write takes place to the device. The parts contain a power-down feature that reduces the current consumption to 200nA @ 5V (80nA @ 3V).

KTA5314:4 buffered 10-Bit DACs in MSOP10L
KTA5324:4 buffered 12-Bit DACs in MSOP10L
Low power operation: 500uA @ 3V,
600uA @ 5V
2.5V to 5.5V power supply
Power-down to 80nA @ 3V,200nA @ 5V
Double-buffered input logic
Output range:0V to
Power-on reset to 0V
On-chip, rail-to-rail output buffer amplifiers
Temperature range -40℃ to +105℃
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
Industrial process controls